#2 Crushed Stone in Wisconsin
Set below the finished surface, #2 Crushed Stone gives Wisconsin farm lanes and entrances an open layer that can drain through hard winters.
- Size: About 1-1/2 inches to 2-1/2 inches
- Grading: #2, washed with no fines
- Type: Large angular crushed stone
- Supplied as: #2 or the closest local equivalent; we confirm the exact material before delivery
From $446 for 1 ton, delivery included (larger loads cost significantly less per ton)
Free delivery included
Free delivery anywhere in Wisconsin
Pick a delivery date
Weekday delivery, earliest Oct 29
Get a Free Quote
Fill out the form and our sales team will get back to you within the hour.
Everything You Need to Know About #2 Crushed Stone
Size and Grading
- Size
- About 1-1/2 inches to 2-1/2 inches
- Grading
- #2, washed with no fines
- Type
- Large angular crushed stone
- Supplied as
- #2 or the closest local equivalent; we confirm the exact material before delivery
Deep frost can shift wet ground through Wisconsin freeze and thaw seasons, especially below farm lanes and construction approaches. #2 Crushed Stone is made of large angular pieces that do not form a tight surface. Washed material without fines leaves broad spaces among the stone, allowing drainage around culverts and low spots where water can collect.
Its rough texture helps it stay in place under tire traffic at an entrance, where mud control matters before vehicles reach the road. For a lane or approach that needs a smoother finished surface, use #2 Crushed Stone as the lower drainage layer and install the driving material over it. This keeps the open stone in the part of the build where it can support heavy base work without being expected to provide the final surface.
Quickly Calculate How Much You Need
Material: #2 Crushed Stone
How to Measure
Measure the length and width of your project area in feet
Decide on depth in inches (2" for landscaping, 4" for driveways)
Enter the values above and we'll calculate the tonnage you need
Need help figuring out the right amount? We can help!
Call or text us at (414) 485-9466 and we'll help you calculate the right quantity for your project.
Not sure how much you need? The Stone Calculator has depth guides, coverage charts and worked examples for this material.
Common Uses
Construction Entrances
Place a deep layer of angular stone at the road-side edge of a work site to help remove mud from truck tires before trucks leave.
Culvert & Ditch Lining
Use substantial stone around culvert outlets and along ditches where runoff gathers, helping keep the lining in place.
Load-Bearing Base
Install as an initial course below farm lanes, equipment pads, or soft areas, then finish with a smaller aggregate.
Drainage Courses
The open spaces between pieces let high water volumes pass through the course and away from the project area.
Why Choose #2 Crushed Stone
Stays Put
Its weight and large pieces help limit tire-caused rutting and displacement.
Open Drainage
Without fines, washed stone leaves voids that let water pass through the layer.
Spans Weak Subgrade
Angular, larger pieces help spread weight across wet or unstable subgrade.
Low Maintenance
After installation, upkeep is generally limited to periodic replenishment.
