What is the difference between crushed stone and Natural Pea Gravel?

Crushed stone, like 3/4" Crushed Stone, has angular faces from the crusher and locks together, so it works for drainage beds and backfill. Natural Pea Gravel is rounded and smooth, so it stays loose and moves underfoot. Use Natural Pea Gravel for walkways, play areas, dog runs and drainage tops, and crushed stone where you need the material to hold its place.

Should I order material by the ton or by the yard?

Either works, because the same volume weighs the same. Order by the ton when your estimate is already in weight, and by the yard when you are filling a measured volume like a base layer. Have your depth ready: a shallow layer is common for a top dressing, and base layers run thicker depending on soil and traffic.

Which stone is best for drainage in Pepin County?

Match the stone to where the water goes. Drain Rock handles French drains, foundation drains and downspout runs, and 3/8" Crushed Stone works for pipe bedding and tighter spots. On steep slopes and stream banks, RipRap armors the bank against runoff and heavy rain, which matters in the coulees and along the valleys.

Pepin County Traffic Bond and Gravel Delivery, WI

What do you order for a driveway or a drainage fix on Pepin County ground? Wisconsin Rock Supply handles gravel, stone and aggregate delivery in Pepin County, WI, and most jobs here start with traffic bond. The county sits in the Driftless Area and western coulees, where silt loam over sandstone and dolomite sheds water fast.

That ground decides your material. Steep slopes need a base that packs and holds, and low valley sites need drainage stone that moves water away.

Materials Delivered in Pepin County

Order by size. Coarse stone goes at the bottom for strength and drainage, then base, then the fine material on top.

Traffic bond carries most jobs in Pepin County. It is the crushed dense-graded base Wisconsin suppliers sell under that name. Breaker run is Section 311, stone run through a primary crusher to 6 inches or less, used mainly for subgrade correction.

Some suppliers just label dense base as road gravel. Same material, same job: a firm, draining surface under a drive or a pad. Screenings handle paver and patio bedding, and pulverized topsoil finishes the grade after the base is compacted.

Ground Conditions Across Pepin County

Time your delivery around the working season. Base work runs from the end of the spring thaw into late fall. Wet silty soil on steep grades ruts badly, so hauling on soft ground costs you base depth and compaction.

Frost drives the base numbers. Frost depth runs at least 48 inches for footings under the Uniform Dwelling Code, and 48 to 72 inches under pavement by late winter. Silty soil holds water and softens as frost comes out, so a thin base on a slope or at a hillside seep ruts easily.

Water is the other factor. Rain and snowmelt run fast off steep ridges into narrow valleys, where heavy storms can flood valley towns. Where limestone and dolomite bedrock is shallow, water also drains through cracks, sinkholes and springs. Put a drainage layer under any slab or drive near a spring, and use rip rap on stream banks and culvert outlets.

Runoff on ridge-top fields washes easily eroded loess downhill and cuts gullies. A compacted traffic bond shoulder and coarse stone at the outlet slow that damage.

Delivery Across Pepin County

Wisconsin Rock Supply delivers bulk material across Pepin County, including Durand, Arkansaw and Stockholm. Order online and size the load by the ton or by the yard, whichever your project math already uses. A bulk load is dumped where the truck can safely reach, so plan the drop spot before the driver arrives.

Lead time depends on the material and the season. Order base before the spring thaw ends and before fall rain, and allow extra time on posted county, town and village roads while frost comes out. Class II state highways and posted roads carry spring weight limits, which can change how a load is scheduled.

Choosing the Right Material

Ground shifts the answer as you move between counties. Pierce County shares Pepin County's Driftless Area and western coulees ground: silt loam formed in windblown loess over sandstone and dolomite bedrock, thin and stony on steep slopes and some ridge tops. Expect similar base and drainage choices there, with the same attention to slope and spring seepage.

Eau Claire County and Dunn County sit in the Chippewa Valley, on Northern and west-central Wisconsin glacial uplands. That ground is glacial till and outwash, ranging from sand and gravel and stony Top Soil to silty loam, with peat and muck in bogs and other low, wet ground. Where you hit muck or wet ground, breaker run under traffic bond does more work than extra base alone.

Order Gravel and Stone for Pepin County

Wisconsin Rock Supply delivers gravel, stone, sand, topsoil and mulch across Pepin County, from the ridge tops down to the valley towns. Start with traffic bond if you are building a base, or drainage stone if water is the problem. Size your load by the ton or yard, place the order online, and we will get your material out to the site.

Gravel, Stone and Soil for Pepin County, WI