Crushed Stone, Sand and Gravel in Arlington, WI

Order gravel and aggregate delivery in Arlington, WI online. Pick your material, pick your tonnage or yardage, and Wisconsin Rock Supply hauls it to your site in Columbia County.

Start with traffic bond for driveways and pads. Add clear stone, sand or black dirt as the job needs.

Materials for Arlington Projects

Traffic bond is the base that carries the load here. It packs hard under a plate compactor and locks together, so driveways, parking pads and shed floors stay put.

For a driveway, lay traffic bond first, then top it with Driveway Gravel for a tighter running surface. On soft or clay ground, start with Breaker Run as a heavy sub-base, then cap it with base.

Washed stone handles water and backfill. Drain Rock keeps French drains and downspout runs flowing, and 3/4" Crushed Stone beds drainage and backfills foundations. Screenings bed pavers, patios and walkways, and hard-pack as a top dressing.

Sand and soil finish the job. Mason Sand sets block and paver joints. Top Soil, pulverized so it spreads fine, grades lawns and beds, and Fill Dirt raises low spots before it goes down.

Ground and Conditions in Arlington

Water is the driver. Rain and snowmelt collect in kettles, marshes and low ground between the drumlins and moraines, and slow-draining till holds that water near the surface.

So build for drainage. Dig your base deep enough that traffic bond sits above the wet layer, and add clear stone or drain rock where water has nowhere to go. On sandy outwash, the same rain disappears fast and compaction is the bigger job.

Silty soil washes off bare slopes, so seed or stone them before the next storm. Cut ditches and stream banks take the same hit, and rip rap armors those edges against spring runoff.

Time the work. Base, driveway and paver projects run from the end of the spring thaw into late fall. Class II state highways and posted county, town and village roads carry spring weight limits while frost comes out, and frozen ground stops compaction in winter.

Frost still reaches at least 48 inches for footings under the Uniform Dwelling Code, and 48 to 72 inches under pavement by late winter. Silty and clayey spots heave and soften during the thaw, so plan base depth for that movement.

Delivery to Arlington and the Surrounding Area

Bulk material arrives on a dump truck and is tipped where you need it. Have the drop spot clear, level and reachable, with overhead wires and low branches checked first.

Order by the ton or the yard when you check out online. Not sure which? Size the load by measuring length, width and depth of your area, then let the site convert it.

Deliveries cover Arlington and Columbia County, including Portage, Columbus, Lodi, Poynette and Pardeeville.

Questions from Arlington Buyers

Do you supply contractors working in Arlington?

Yes. Contractors, builders and homeowners all order the same way: online, by the ton or yard, delivered to the site. Tell us the material, the quantity and where the truck can dump. Traffic bond, breaker run, clear stone, sand and black dirt all move the same route into Columbia County.

Do you deliver traffic bond to Arlington, WI?

Yes. Traffic bond is the base material we deliver most in this market, and it comes straight to driveways, pads and building sites around Arlington. Order it online by the ton or yard. On soft ground, pair it with breaker run underneath so the base holds.

Order Base, Stone and Sand for Your Arlington Job

Driveways, parking pads, shed floors, patio bases and drainage all start with the right base material. Pick traffic bond for the load-bearing layer, breaker run under it on soft ground, and clear stone or drain rock where water needs to move. Order online and we deliver across Arlington and Columbia County.