Gravel and Aggregate Delivery in Clayton, WI

Wisconsin Rock Supply handles gravel and aggregate delivery in Clayton, WI for two kinds of buyers: contractors working several jobs at once, and homeowners fixing one driveway or one yard. Both usually start with the same question about traffic bond. Clayton sits in Polk County, where glacial till and outwash leave sand and gravel in some spots and silty loam in others.

That mix decides what your base needs to be, and we will tell you which way to go.

Materials for Clayton Projects

Most work here starts with soil and grading, so we lead with that. Pulverized topsoil, which many buyers still call black dirt, is screened and broken down so it spreads evenly for lawns, grading and bed prep. Garden mix blends that topsoil with compost for raised beds and planting areas, and it holds moisture better through a dry stretch than plain dirt.

Fill dirt goes down first to raise grade and fill low spots, then topsoil caps it. Below all of that, traffic bond is the crushed dense-graded base that packs hard under driveways, parking pads and shed floors.

Two more worth knowing: breaker run is the coarse sub-base you put under traffic bond over soft or clay ground, and screenings (stone dust) lock pavers and flagstone in place. For anything that has to drain, the washed stone family covers it, from clear stone at 3/4 inch down to #8 and #89 for joints and tight bedding.

Ground and Conditions in Clayton

Start with where water goes, because that drives most of the material decisions here. Sandy outwash drains fast, but dense till slows water from soaking in, so snowmelt and heavy rain collect in low spots, wetlands and flat fields.

While the subsoil is still frozen, that water cannot drain down at all. It sits on top, softens the ground and shows up as ruts the first time anything heavy crosses it.

Frost makes the same point from the other side. Long, cold winters push frost deep, and footings under the Uniform Dwelling Code need at least 48 inches of depth here. Frost leaves the ground later in spring than it does in southern Wisconsin, so wet, silty or loamy spots heave and soften under a thin base while the ground thaws.

Build the base deeper than you think you need in those spots, and give trapped water somewhere to go. A drainage layer of clear stone or drain rock under a compacted base costs less than redoing a drive.

Runoff also carries loose sand and silt off bare slopes, cleared lots and cropland into ditches, streams and lakes, and it wears away unprotected banks. Rip rap armors shorelines, culvert outlets and slopes against waves, spring runoff and heavy rain. If you are grading, put erosion control in the plan before the bare ground sits through a spring.

Delivery to Clayton and the Surrounding Area

Bulk material arrives by truck and gets dumped, so the site needs to be ready before the truck shows up. Clear a spot the driver can reach and turn around in, and think about where the pile lands. A load dropped too close to the house, or on ground you just graded, is a problem you have to shovel out.

Ordering online means you pick the material and the quantity together. Most of our aggregate is sold by the ton, which is how contractors order, and soil is often easier to figure by the cubic yard. Figure your area and depth, and use the calculator on the product page to size the load.

We deliver to Clayton and the rest of Polk County, including Amery, Osceola, St. Croix Falls, Luck and Frederic.

Questions Clayton Buyers Ask

Can I order material by the ton for delivery in Clayton?

Yes. Most aggregate here, including traffic bond, breaker run and the washed stone family, is ordered by the ton, and that is how contractors on multi-phase jobs buy it. Soil, fill and mulch are usually easier to think about by the cubic yard. Measure the area and depth you are covering and run the numbers through the calculator on the product page to match the load to the job.

What stone should I use for drainage in Clayton?

It depends on what the water is doing. For French drains, foundation drains and downspout runs, drain rock is the standard choice, with washed 3/4 inch clear stone behind walls and under slabs. For pipe bedding and tighter spots, drop to #8 or #89. Where you need volume and severe drainage, railroad ballast or #4 stone works. Keep fines out of any drainage layer, because silt clogs it.

Ordering Soil, Stone and Base for Your Clayton Project

Whether you are grading a yard, bedding a patio or rebuilding a driveway, the material list usually starts with fill, topsoil or traffic bond and grows from there. Pick your material, size the load, and order online for delivery in Clayton. We will get it to the site.