Washed Sand Delivery for Curtiss, WI

What do you order when a building pad, driveway or low spot in Curtiss needs to come up to grade? For gravel and aggregate delivery in Curtiss, WI, Wisconsin Rock Supply starts most of those jobs with fill dirt, then caps the pad with traffic bond. This ground is glacial till and outwash, so sand and gravel sit beside silty loam and low, wet pockets that hold water.

Materials for Curtiss Projects

Raising grade and building pads drive most of the orders here. The material you pick under a slab or drive decides how that surface holds up after a spring thaw.

Start with Fill Dirt to raise a low yard, fill a hole or build up a pad. It goes down first, then topsoil or a compacted base goes over it.

Cap the pad with 3/4" Traffic Bond, the crushed dense-graded base Wisconsin crews call traffic bond.

Where the ground is soft or clay-heavy, put Breaker Run down first as a coarse sub-base, then cap it with traffic bond.

For a patio or walkway, bed the pavers in Screenings, which most Wisconsin yards sell as screenings and some buyers still call stone dust.

Around a foundation or a French drain, use Drain Rock, also called clear drain stone, so water moves instead of pooling against the wall.

Ground and Conditions in Curtiss

Start from the soil, because it decides how deep your base has to be. Sandy outwash drains fast, but dense till slows water from soaking in, so snowmelt and heavy rain collect in low spots and flat fields.

That water cannot drain down while the subsoil is still frozen. Wet, silty or loamy spots heave and soften under a thin base as the ground thaws, which is why an under-built pad cracks and rutts the first spring.

Runoff also carries loose sand and silt off bare slopes, cleared lots and cropland into ditches and streams, and it wears away unprotected banks. Rip rap armors culvert outlets, stream banks and slopes against that flow.

Frost leaves later here, so spring weight limits on Class II state highways and posted county, town and village roads lift later than in southern Wisconsin.

Ground work waits until frost is out and soils have drained. Frost depth runs at least 48 inches for footings under the Uniform Dwelling Code, and it goes deeper and leaves later than in southern Wisconsin.

Delivery to Curtiss and the Surrounding Area

Order online and pick your quantity by the ton or the cubic yard. Measure the area, decide the depth, and the site works out the load size for you before you check out.

Bulk delivery to a site in Curtiss means a truck that needs a clear, firm approach and a spot to dump. Mark any septic, well or buried line before the load arrives.

Curtiss sits in Clark County, and we also run loads to Neillsville, Thorp, Colby, Abbotsford and Loyal. Delivery covers Wisconsin only.

Questions Curtiss Buyers Ask

What is the best base under pavers in Curtiss?

Compact a traffic bond base, then bed the pavers in screenings. Traffic bond packs hard and carries the load, and screenings give you a fine, level bed that locks the pavers in place. How deep the base goes depends on your soil; wet, silty or loamy spots need more than sandy outwash does.

Do you supply contractors working in Curtiss?

Yes. Contractors building pads, drives and drainage in Curtiss and across Clark County can order fill dirt, breaker run, traffic bond, screenings and drain rock online. Pick the material and the quantity, and we deliver it to the site so your crew keeps working.

Order Fill and Base Material in Curtiss

For raising grade, building a pad or laying a drive that lasts, fill dirt and traffic bond do the heavy work. Wisconsin Rock Supply delivers both across Curtiss and Clark County. Size your load online and place your order when you are ready.