Pea Gravel and Bulk Aggregates for Kimberly, WI

If you are figuring out gravel and aggregate delivery in Kimberly, WI, start with the numbers. Measure the square footage, pick your depth in inches, and the tonnage falls out of that. Wisconsin Rock Supply sells bulk material by the ton, so you know what you are paying for before the truck rolls.

Kimberly sits on clay-rich glacial till that drains slowly, so half your material list is usually about moving water. Traffic bond, clear stone and washed sand do most of that work here.

Materials for Kimberly Projects

Drainage is a common reason to order stone in Outagamie County. Water ponds on flat clay ground and runs off rather than soaking in, so French drains, drywells and downspout runs do the heavy lifting. Here is the size ladder we work down, coarsest to finest, and what each one is good for.

For a French drain or a downspout run, start with Drain Rock. It is washed stone with the fines out, so water moves through it instead of silting up. Cap the trench with traffic bond and the stone stays locked in place.

Under soft ground, lay Breaker Run first. It is coarse crushed stone with the fines still in it, and it bridges over clay that wants to pump. A lift of traffic bond over the top gives you the hard, tight surface.

Walkways and dog runs take Natural Pea Gravel. Around a foundation or a pipe, 3/8" Crushed Stone beds in tighter than the bigger clear stone.

Ground and Conditions in Kimberly

The working season is the first thing to plan around. Clay sites here stay soft after the thaw and after heavy rain, so base and paver work goes best once the ground has drained, from late spring into fall.

Frost is the other half of it. Cold winters and a spring thaw that works down from the surface mean wet clay over still-frozen ground cannot drain. It turns soft, and a thin gravel base heaves and ruts.

Build the base thicker than you would in sand country. Frost depth runs at least 48 inches for footings under the Uniform Dwelling Code, and 48 to 72 inches under pavement by late winter, so a shallow lift will not hold.

Watch the calendar too. Class II state highways and posted county, town and village roads carry spring weight limits while frost comes out, and that can change how a load reaches your site.

Delivery to Kimberly and the Surrounding Area

You order online and we deliver in bulk by the ton. Figure your quantity from square footage and depth with the calculator before you order.

We cover Kimberly and the rest of Outagamie County, including Appleton, Kaukauna, Greenville, Little Chute and Combined Locks. Lead time depends on the material and the season, so order ahead of the pour or the dig.

Think about where the truck can put the pile. A load of traffic bond needs a spot you can spread from, not a spot that blocks the drive.

Order Bulk Aggregate for Kimberly

Wisconsin Rock Supply delivers traffic bond, washed stone, sand and soil across Kimberly and the surrounding Outagamie County area. Measure the job, pick your depth, and order online by the ton. Place your order when you are ready and we will get the material to your site.