Mason Sand for Patios in Oneida, WI

Order gravel and aggregate delivery in Oneida, WI the easy way. Wisconsin Rock Supply sells bulk material online by the ton or the yard. Pick your product, set the quantity, and we haul it to your site. Start with traffic bond for the base, then finish with the bedding and joint material your flatwork needs. Clay ground around Brown County drains slowly, so plan your layers before you order.

Materials for Oneida Projects

Under a paver patio in Oneida, the base and bedding do more of the work than the pavers themselves. Traffic bond, also called 3/4 inch traffic bond or 3/4 inch dense graded base, is the compacted base course. It packs hard and holds a flat plane under pavers and slabs. Wisconsin suppliers sell it as 3/4" Traffic Bond.

Bedding goes on top. Mason Sand is the standard bed for brick, block and paver joints, and it doubles as play sand. Washed Sand levels and beds under slabs and concrete. For a tighter bed, Screenings pack hard and lock pavers in place; Wisconsin crews know this material as stone dust.

Where clay sits under the patio, open the sub-base first. Breaker Run is coarse crushed stone with fines, and it bridges soft ground so the traffic bond above it stays firm. Cap it with traffic bond before bedding.

Ground and Conditions in Oneida

Cut the base too thin here and it shows fast. Clay-rich glacial till drains slowly, so water ponds on flat ground and runs off to ditches. Wet clay over still-frozen ground cannot drain at all, and a thin gravel base heaves and ruts through the spring thaw.

Build the base deep enough to bridge that. Compact traffic bond in lifts, and add a drainage layer where water sits. Clear stone and Drain Rock move water away from a patio edge or a downspout run.

Frost drives the depth. Footings need at least 48 inches under the Uniform Dwelling Code, and pavement sees 48 to 72 inches of frost by late winter. Clay sites stay soft after the thaw and after heavy rain, so base and paver work goes best from late spring into fall. Spring weight limits post on county, town and village roads while frost comes out.

Delivery to Oneida and the Surrounding Area

Order online and choose your unit. Sold by the ton, material is weighed and priced by weight. Sold by the yard, it is measured by volume. Loose aggregate is lighter per yard than sand or topsoil, so the two numbers do not match one to one.

Estimate quantity before you order. Multiply length by width by depth in feet, then divide by 27 for cubic yards. For a patio, figure the traffic bond base and the bedding sand as separate lines.

We deliver bulk material across Oneida and Brown County, including Green Bay, De Pere, Suamico, Pulaski and Wrightstown. Spot the truck where it can dump close to the work.

Questions Oneida Buyers Ask

What gravel is best for a driveway in Oneida?

Traffic bond is the base. It is a crushed dense graded material that compacts hard, and it carries a driveway over clay that moves with the frost. Top it with Driveway Gravel for the wearing surface. Where the ground is soft, put breaker run underneath first, then traffic bond, then the top course.

How much material will my project need?

Measure the area and the depth you want, then convert. Length times width times depth in feet gives cubic feet; divide by 27 for cubic yards. Order sand and base by the yard or the ton, whichever you prefer. Our online calculator handles the math and converts between tons and yards for you.

Size Your Patio Order

Run your patio dimensions through the calculator and let it convert tons to yards for you. Check the base depth against our frost numbers, then add bedding sand on its own line. When the numbers look right, place the order online and we will deliver it to your Oneida site.