Skip to main content
FREE Delivery!|(414) 485-9466

Clark County, Wisconsin ยท Free Delivery

Bulk Material Delivery in Willard, WI

Free delivery to Willard on every order, with loads arriving in as fast as 2 business days.

Delivering to Willard, WI

Free delivery on every order.

  • Free delivery to Willard
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Willard

Crushed gravel and base materials that compact under tires.

Rock & Stone delivered to Willard

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Willard

Decorative delivered to Willard

Rounded stone for beds, borders and water features.

Sand delivered to Willard

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Willard

Soil and fill by the ton, mulch by the cubic yard.

How delivery to Willard works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Willard.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Willard addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Wisconsin Rock Supply handles gravel and aggregate delivery in Willard, WI, and traffic bond is the material most orders start with. It is the crushed dense-graded base that packs hard, and crews here use it under driveways, parking pads and shed floors. Around Willard, dense till slows water from soaking in, so a base that sheds water matters as much as one that packs.

Materials for Willard Projects

Water is the reason most Willard orders get placed. Dense till holds snowmelt and heavy rain in low spots, so a driveway, a downspout run or a yard that stays soft all spring usually needs drainage stone before it needs anything else. The list below runs from the finest drainage stone to the coarsest, with what each one does.

Screenings, sold elsewhere as stone dust, are the fine end. Use them for paver and patio bedding, walkway surfaces and a hard-packing top dressing on a drive.

For French drains, downspout runs and footing drains, the standard choice is Drain Rock. It is washed clear stone, so water moves through the void space instead of sitting in fines. Pipe bedding and tight drainage work take 3/8" Crushed Stone, which sits neatly under and around pipe.

Where a drain has to move a lot of water fast, or where you are building a construction entrance or trench bottom, #4 Crushed Stone is the coarse end of the range. Drywells and deeper drainage beds often take a washed stone like #57 Stone over a coarser bottom layer.

Once drainage is right, cap it. 3/4" Traffic Bond is the dense-graded base that ties a drive or pad together, and over soft or clay ground it goes on top of Breaker Run, the coarse sub-base that bridges the weak spot.

Ground and Conditions in Willard

Willard sits in Clark County, in the part of Wisconsin where frost goes deeper and leaves later than it does in the south. That timing sets the working season.

Ground work waits until frost is out and soils have drained. A pad built on ground that is still frozen or still holding meltwater will heave and soften as it thaws. Wet, silty or loamy spots are the ones that fail under a thin base.

Frost depth runs at least 48 inches for footings under the Uniform Dwelling Code, and it leaves the ground later than in southern Wisconsin. That is the reasoning behind a deeper, better-drained base here: you want water out from under the slab or drive before it freezes, not trapped in it.

The local ground is glacial till and outwash, ranging from sand and gravel and stony sandy loam to silty loam where windblown silt caps the till, with peat and muck in bogs, swamps and other low, wet ground. Sandy outwash drains quickly. Dense till does not.

Delivery to Willard and the Surrounding Area

You can order online and have bulk material delivered to a site in Willard. Delivery covers the surrounding part of Clark County as well, including Neillsville, Thorp, Colby, Abbotsford and Loyal.

Material is sold by the ton or by the yard. To pick a quantity, work out the area and the depth you need, then convert. A drainage trench filled with clear stone costs far less than one filled with base, so decide what each layer does before you order.

Lead time depends on the material and the season. Frost keeps ground work closed longer here, so spring orders tend to bunch up once the roads clear. Placing a drainage or base order before the thaw helps you get on the ground sooner.

Order Bulk Material for Your Willard Project

Wisconsin Rock Supply delivers traffic bond, washed drainage stone, sand and soil across Willard and the rest of Clark County. If water is your problem, start with the drainage stone and build up from there. Order online when you are ready and have the right material brought to your site.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Willard, WI

Do you deliver traffic bond to Willard, WI?

Yes. Wisconsin Rock Supply delivers traffic bond and other bulk aggregate to Willard and the surrounding part of Clark County, including Neillsville, Thorp, Colby, Abbotsford and Loyal. Traffic bond is the crushed dense-graded base sold on the site as 3/4" Traffic Bond. Order online and choose a quantity by the ton or yard.

What gravel is best for a driveway in Willard?

Start with a compacted traffic bond base, since it packs hard and sheds water. Over soft or clay ground, put breaker run underneath as a heavy sub-base. Then top it with driveway gravel for the wearing surface. Around Willard, where dense till holds meltwater, the base and its drainage matter as much as the top layer.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.